|
man page(1) manual page
Table of Contents
cdparanoia 9.8 (Paranoia release III libcdio) - an audio CD reading
utility which includes extra data verification features
cdparanoia [options] span [outfile]
cd-paranoia retrieves audio tracks from CDDA capable CD-ROM drives.
The data can be saved to a file or directed to standard output in WAV,
AIFF, AIFF-C or raw format. Most ATAPI, SCSI and several proprietary
CD-ROM drive makes are supported; cd-paranoia can determine if the target
drive is CDDA capable.
In addition to simple reading, cd-paranoia adds extra-robust data verification,
synchronization, error handling and scratch reconstruction
capability.
-v --verbose
Be absurdly verbose about the autosensing and reading process.
Good for setup and debugging.
- -q --quiet
-
Do not print any progress or error information during the reading
process.
- -e --stderr-progress
-
Force output of progress information to stderr (for wrapper
scripts).
- -V --version
-
Print the program version and quit.
- -Q --query
-
Perform CD-ROM drive autosense, query and print the CD-ROM table
of contents, then quit.
- -s --search-for-drive
-
Forces a complete search for a cdrom drive, even if the
/dev/cdrom link exists.
- -h --help
-
Print a brief synopsis of cd-paranoia usage and options.
- -p --output-raw
-
Output headerless data as raw 16 bit PCM data with interleaved
samples in host byte order. To force little or big endian byte
order, use -r or -R as described below.
- -r --output-raw-little-endian
-
Output headerless data as raw 16 bit PCM data with interleaved
samples in LSB first byte order.
- -R --output-raw-big-endian
-
Output headerless data as raw 16 bit PCM data with interleaved
samples in MSB first byte order.
- -w --output-wav
-
Output data in Micro$oft RIFF WAV format (note that WAV data is
always LSB first byte order).
- -f --output-aiff
-
Output data in Apple AIFF format (note that AIFC data is always
in MSB first byte order).
- -a --output-aifc
-
Output data in uncompressed Apple AIFF-C format (note that AIFFC
data is always in MSB first byte order).
- -B --batch
-
Cdda2wav-style batch output flag; cd-paranoia will split the
output into multiple files at track boundaries. Output file
names are prepended with ’track#.’
- -c --force-cdrom-little-endian
-
Some CD-ROM drives misreport their endianness (or do not report
it at all); it’s possible that cd-paranoia will guess wrong.
Use -c to force cd-paranoia to treat the drive as a little
endian device.
- -C --force-cdrom-big-endian
-
As above but force cd-paranoia to treat the drive as a big
endian device.
- -n --force-default-sectors n
-
Force the interface backend to do atomic reads of n sectors per
read. This number can be misleading; the kernel will often
split read requests into multiple atomic reads (the automated
Paranoia code is aware of this) or allow reads only wihin a
restricted size range. This option should generally not be
used.
- -d --force-cdrom-device device
-
Force the interface backend to read from device rather than the
first readable CD-ROM drive it finds containing a CD-DA disc.
This can be used to specify devices of any valid interface type
(ATAPI, SCSI or proprietary).
- -g --force-generic-device device
-
This option is an alias for -d and is retained for compatibility.
- -S --force-read-speed number
-
Use this option explicitly to set the read rate of the CD drive
(where supported). This can reduce underruns on machines with
slow disks, or which are low on memory.
- -t --toc-offset number
-
Use this option to force the entire disc LBA addressing to shift
by the given amount; the value is added to the beginning offsets
in the TOC. This can be used to shift track boundaries for the
whole disc manually on sector granularity. The next option does
something similar...
- -T --toc-bias
-
Some drives (usually random Toshibas) report the actual track
beginning offset values in the TOC, but then treat the beginning
of track 1 index 1 as sector 0 for all read operations. This
results in every track seeming to start too late (losing a bit
of the beginning and catching a bit of the next track). -T
accounts for this behavior. Note that this option will cause
cd-paranoia to attempt to read sectors before or past the known
user data area of the disc, resulting in read errors at disc
edges on most drives and possibly even hard lockups on some
buggy hardware.
- -O --sample-offset number
-
Some CD-ROM/CD-R drives will add an offset to the position on
reading audio data. This is usually around 500-700 audio samples
(ca. 1/75 second) on reading. So when cd-paranoia queries a specific
sector, it might not receive exactly that sector, but
shifted by some amount.
Use this option to force the entire disc to shift sample position output
by the given amount; This can be used to shift track boundaries for
the whole disc manually on sample granularity. Note that if you are
ripping something including the ending of the CD (e.g. the entire
disk), this option will cause cd-paranoia to attempt to read partial
sectors before or past the known user data area, probably causing read
errors on most drives and possibly even hard lockups on some buggy
hardware.
- -Z --disable-paranoia
-
Disable all data verification and correction features. When
using -Z, cd-paranoia reads data exactly as would cdda2wav with
an overlap setting of zero. This option implies that -Y is
active.
- -z --never-skip[=max_retries]
-
Do not accept any skips; retry forever if needed. An optional
maximum number of retries can be specified; for comparison,
default without -z is currently 20.
- -Y --disable-extra-paranoia
-
Disables intra-read data verification; only overlap checking at
read boundaries is performed. It can wedge if errors occur in
the attempted overlap area. Not recommended.
- -X --abort-on-skip
-
If the read skips due to imperfect data, a scratch, whatever,
abort reading this track. If output is to a file, delete the
partially completed file.
- -x --test-flags mask
-
Simulate CD-reading errors. This is used in regression testing,
but other uses might be to see how well a CD-ROM performs under
(simulated) CD degradation. mask specifies the artificial kinds
of errors to introduced; “or"-ing values from the selection
below will simulate the kind of specified failure.
0x10 - Simulate under-run reading
- OUTPUT SMILIES
-
:-) Normal operation, low/no jitter
:-| Normal operation, considerable jitter
:-/ Read drift
:-P Unreported loss of streaming in atomic read operation
8-| Finding read problems at same point during reread; hard to correct
:-0 SCSI/ATAPI transport error
:-( Scratch detected
;-( Gave up trying to perform a correction
8-X Aborted read due to known, uncorrectable error
:^D Finished extracting
<space>
No corrections needed
- -
- Jitter correction required
- +
- Unreported loss of streaming/other error in read
! Errors found after stage 1 correction; the drive is making the
same error through multiple re-reads, and cd-paranoia is having
trouble detecting them.
- e
- SCSI/ATAPI transport error (corrected)
- V
- Uncorrected error/skip
The span argument specifies which track, tracks or subsections of
tracks to read. This argument is required. NOTE: Unless the span is a
simple number, it’s generally a good idea to quote the span argument to
protect it from the shell.
The span argument may be a simple track number or an offset/span specification.
The syntax of an offset/span takes the rough form:
1[ww:xx:yy.zz]-2[aa:bb:cc.dd]
Here, 1 and 2 are track numbers; the numbers in brackets provide a
finer grained offset within a particular track. [aa:bb:cc.dd] is in
hours/minutes/seconds/sectors format. Zero fields need not be specified:
[::20], [:20], [20], [20.], etc, would be interpreted as twenty
seconds, [10:] would be ten minutes, [.30] would be thirty sectors (75
sectors per second).
When only a single offset is supplied, it is interpreted as a starting
offset and ripping will continue to the end of the track. If a single
offset is preceeded or followed by a hyphen, the implicit missing offset
is taken to be the start or end of the disc, respectively. Thus:
- 1:[20.35]
-
Specifies ripping from track 1, second 20, sector 35 to the end
of track 1.
1:[20.35]Specifies
ripping from 1[20.35] to the end of the disc
- -2
- Specifies ripping from the beginning of the disc up to (and
including) track 2
- -2:[30.35]
-
Specifies ripping from the beginning of the disc up to 2:[30.35]
- 2-4
- Specifies ripping from the beginning of track 2 to the end of
track 4.
Again, don’t forget to protect square brackets and preceeding hyphens
from the shell.
A few examples, protected from the shell:
Query only with exhaustive search for a drive and full reporting of
autosense:
cd-paranoia -vsQ
Extract an entire disc, putting each track in a seperate file:
cd-paranoia -B
Extract from track 1, time 0:30.12 to 1:10.00:
cd-paranoia “1[:30.12]-1[1:10]"
Extract from the beginning of the disc up to track 3:
cd-paranoia -- “-3"
The “--” above is to distinguish “-3” from an option flag.
The output file argument is optional; if it is not specified, cd-paranoia
will output samples to one of cdda.wav, cdda.aifc, or cdda.raw
depending on whether -w, -a, -r or -R is used (-w is the implicit
default). The output file argument of - specifies standard output; all
data formats may be piped.
cd-paranoia sprang from and once drew heavily from the interface of
Heiko Eissfeldt’s (heiko@colossus.escape.de) ’cdda2wav’ package. cdparanoia
would not have happened without it.
Joerg Schilling has also contributed SCSI expertise through his generic
SCSI transport library.
Monty <monty@xiph.org>
Cdparanoia’s homepage may be found at: http://www.xiph.org/paranoia/
Revised for use with libcdio by Rocky <rocky@panix.com>
The libcdio homepage may be found at: http://www.gnu.org/software/libcdio
Table of Contents
|
